My wire bundle under my drivers seat in my 2014 SEL kinda rotted and I believe the wire that controls all the forward & back of the seat and the seatback is dead. The purple/red wire corroded out, and when I take the plug apart, I see that the pin that corresponds to that wire is missing and just a pile of green corrosion. That means either splicing in a new plug, or a new seat.
The issue is that the seat of course is way back, and so I can't remove the back bolts that hold the seat to the cross rail. I know the motor is good. Just wondering if there is a way to manually spin the cable to get the seat moved or maybe hook a 12 volt source to the plug and move the seat that way so I can remove it to work on it.
Thanks!
Additionally, are there any manual black leather seats for the Flex that just bolt in?
The issue is that the seat of course is way back, and so I can't remove the back bolts that hold the seat to the cross rail. I know the motor is good. Just wondering if there is a way to manually spin the cable to get the seat moved or maybe hook a 12 volt source to the plug and move the seat that way so I can remove it to work on it.
Thanks!
Additionally, are there any manual black leather seats for the Flex that just bolt in?