As the title says…
The passenger side of my 2019 Sel was stuck on cold so I replaced the blend door actuator as mentioned my several others here.
That didn’t resolve the issue. However, I noticed when it is stuck on cold, if I set it to hot, turn off the car and then start with the remote start, it’ll be on hot when I get in. It stays hot regardless of the temp adjustment. I can change from hot to cold using the above process in reverse.
This leads me to think it’s a bigger issue but thought I’d see if anyone else came across this. I plan on looking at it again today to see if there is anything obvious that would cause it.
Trying to avoid the $$$ of a mechanic but since the weather is turning, the wife would prefer being able to have it work correctly![:lol:]( "Laughing")
The passenger side of my 2019 Sel was stuck on cold so I replaced the blend door actuator as mentioned my several others here.
That didn’t resolve the issue. However, I noticed when it is stuck on cold, if I set it to hot, turn off the car and then start with the remote start, it’ll be on hot when I get in. It stays hot regardless of the temp adjustment. I can change from hot to cold using the above process in reverse.
This leads me to think it’s a bigger issue but thought I’d see if anyone else came across this. I plan on looking at it again today to see if there is anything obvious that would cause it.
Trying to avoid the $$$ of a mechanic but since the weather is turning, the wife would prefer being able to have it work correctly
