Good morning. I’ve been wanting to do rims on my 2014 EB Flex for years. Other things have gotten in the way (building jeeps, racing motorcycles etc) but now it’s time.
I found a set of Rotiform RSE’s in 20x10 +35 with a 6.88 backspacing. (I want to do a square setup)
I know that I won’t have any problem fitting the rears. I just want to know about the poke in the front. I’m running stock size 255/45 ZR20 tires with an 8mm spacer and I am also lowered on H&R springs.
I love the stance, love the handling but the stock 20s leave something to be desired.
Does anyone have pictures of poke with rims of that size on the front? Or a hard yes or no as to whether I’ll get rubbing or other issues? I saw some 20x10.5 25mm and they stuck out way too much for my liking. I like flush or a slight poke.
Thanks a lot!
I found a set of Rotiform RSE’s in 20x10 +35 with a 6.88 backspacing. (I want to do a square setup)
I know that I won’t have any problem fitting the rears. I just want to know about the poke in the front. I’m running stock size 255/45 ZR20 tires with an 8mm spacer and I am also lowered on H&R springs.
I love the stance, love the handling but the stock 20s leave something to be desired.
Does anyone have pictures of poke with rims of that size on the front? Or a hard yes or no as to whether I’ll get rubbing or other issues? I saw some 20x10.5 25mm and they stuck out way too much for my liking. I like flush or a slight poke.
Thanks a lot!