HELP! I have broke 2 passenger side blend door actuators. I purchased a new Motorcraft actuator, left it off of the car and plugged it in. When I adjust my heat, the output shaft spins about 400 degrees! It does a full 360 and about another 1/4 turn. When I turn it to cool, it spins back the same amount. I know my blend door will not move that far which is why my actuators keep breaking. Does this need reset and what is the best way to do that. I have tried pulling fuse #46 for 3 minutes and running the car with no luck. Any help would be appreciated!
↧