Hi there, I have a 2018 Flex SE (2wd) and wanted the ride height to be taller. The original stock height had the rear sitting just 3/4" higher than the front. I took your advice and ordered a similar Explorer leveling kit from Ebay, it was 3" front and 2" rear. I I just had the kit installed today and the results were not what i expected. The front only raised 2.5" (which was OK) but the back was raised by 4.5". I'm trying to figure out where things went wrong and why the rear ended up so high up?
Based on the current outcome, does that mean if I do a 1" rear spacer then i would end up with a 2.25" lift?
I understand i used an Explorer leveling kit but i did some research and it states that they both use a similar multilink independent rear suspension.
Based on the current outcome, does that mean if I do a 1" rear spacer then i would end up with a 2.25" lift?
I understand i used an Explorer leveling kit but i did some research and it states that they both use a similar multilink independent rear suspension.