Quantcast
Channel: Ford Flex Forum
Viewing all articles
Browse latest Browse all 1408

Powertrain / Under The Hood • 2016 to 19 torque converter in a 2010 EcoBoost flex

$
0
0
Hello everyone I just purchased a brand new and bought from Ford zero Mile short block And I would like to change the torque converter but my original torque converter has 4 pads/bolts And I'm hearing that the ones that have the 3 pads/bolts May have had some changes that are actually an improvement upon reliability..
Add replaced more than one torque converter over the years so I'd like to know if I can take a torque converter from a 2019 Taurus or Flex or any other 3.5 L and use it with my 2010 ?
I know I would have to buy a new flywheel that had three bolt holes in it also..

Anybody has done this swapped the four pad and bolt torque converter for the three bolt torque converter please let me know if it worked and how it's going..
Or if anybody knows how to find out what part numbers I need to get to make the three bad and bolt torque converter work in my 2010...
Any helping information would be highly appreciated thank you..

I have a torque converter out of a 2019 Flex already So if that would work that would be the best case scenario considering on a fixed income..

I have included a picture of the torque converter part number Can anyone might be know if this will work In my 2010 EcoBoost Flex
T/C out of a 2019 Naturally aspirated Taurus 3.5l with AWD


Viewing all articles
Browse latest Browse all 1408

Trending Articles