My keyless entry keypad detached itself from my door a few days ago, and since I was doing about 60 it flapped in the breeze and shattered itself (I see a few threads where others have experienced this). Popped into my local u-pull-it and got one for $25 (plus about an hour of finagling the extraction - it's pretty simple if you can run the window up and down, but that's not an option working on a junker in the scrapyard). Got it home and of course the harness connector is completely different. So my options are, cut the connectors off and splice the connector from the broken one onto the salvage one, or go back to the yard (they had almost a dozen Flexes, and then there's another yard a block over that I can try) and try to find a match. So, questions....
Does anybody know what model years would use the same connector as a 2016 (Limited if that matters)?
Or, does anybody know if the wiring colors were consistent over the different versions? Colors are all the same (R/W/Y/P/G/B) but the order in the connector is different. I might try just splicing like-color to like-color and pray it works out, but then I can't take the panel back to the yard and exchange it (if in fact I can find a match at all).
Does anybody know what model years would use the same connector as a 2016 (Limited if that matters)?
Or, does anybody know if the wiring colors were consistent over the different versions? Colors are all the same (R/W/Y/P/G/B) but the order in the connector is different. I might try just splicing like-color to like-color and pray it works out, but then I can't take the panel back to the yard and exchange it (if in fact I can find a match at all).