Powertrain / Under The Hood • Re: Updated PTU vent hose?
I need to do this too. On my 16 with 69k I changed the oil and it was in good shape. I had been waiting to check it before I got crazy in it! Put some fresh oil in it and on the way home tried to find...
View ArticleGeneral Ford Flex Discussions • Re: Flex on the beach, off road?
If it's AWD the exhaust hangs kind of low. I had my wife in my flex following me and It was a little shocking how low the exhaust was, looked like the car was dragging something under it!
View ArticleGeneral Ford Flex Discussions • Waldo Question
WaldoWas there ever an option for leather 3rd row seats from the factory?
View ArticleExterior & Detailing • Gen-2 blackened grille bar?
Was there a blackened grille bar on the Gen-2?
View ArticleExterior & Detailing • Re: Replace 2013 Titanium grille with 2012...
I know this is an old post! Are the 2011 parts the same as the 2012?
View ArticleMembers Rides • Project 2019 Ford Flex!
Well I got here back in August with 12k miles 1 owner. I immediately went to work paint correction the paint and then I coated it with Undrdog Pro + I made it longer then I usually do before I make it...
View ArticleGeneral Ford Flex Discussions • Re: Waldo Question
I am not Waldo, but i don't ever recall one. Even with my Titianlin package they are synthetic.
View ArticleExterior & Detailing • Re: Gen-2 blackened grille bar?
on the later gen-2 the Appearance Package had the black trim kit but only the center bar was black.
View ArticlePowertrain / Under The Hood • Re: Has anyone installed a vent hose on a PTU...
The hardest part honestly is getting that vent cap and fitting out of the PTU.Do you think it's possible without removing the downpipes, dropping the exhaust, or moving anything else in the way? I've...
View ArticleTechnical / How-To Articles • Re: Driver side power seat
same here. I keep forgetting that every 6 month. changing 3rd fuse already.
View ArticleGeneral Ford Flex Discussions • Perfect tool for internet diagnosing!
Perfect tool to be used with parts cannon!
View ArticlePowertrain / Under The Hood • Re: AWD w/ ft to rear shaft removed
Not going to take a chance this far from home, and the local dealership won't render an opinion either way, so it's spend $1,900 and fix it ( plus the tow ). Bad part is if there would have been room...
View ArticleTechnical / How-To Articles • Lower control arm time, recommendations
It's that time. I see many kits on RockAuto, eBay and Amazon. Ford OE is always expensive, aftermarket "deals" often are of lower quality. So my question is two part.Who likes what, which brands to...
View ArticleInterior • 1st DIY repair
Well I now know what my 1st DIY repair will be.After having a manual liftgate for 13 years, this is a nice upgrade. I noticed the problem today and remembered this repair.
View ArticleGeneral Ford Flex Discussions • Re: Best 255/45/20 Tires
Michelin CrossClimate 2Would it be stupid to have them in a state that doesn’t snow?
View ArticleInterior • Re: 1st DIY repair
I need to do mine, too. Been flopping around broken for a couple years
View ArticleGeneral Ford Flex Discussions • Re: Mounting hardware for under-engine cover?
Starting to dislike Tasca very much. This is the third time they listed a part in stock when searched online, only to tell me it’s on national back order with no know ship date and they cancelled the...
View Article