Powertrain / Under The Hood • Re: Has anyone installed a vent hose on a PTU...
I too I'm in the same boat. It is MUCH easier to have already drilled and tapped a drain plug on the PTU and use the existing vent tube (if it was available) to fill the PTU.I also have the vent cap...
View ArticleGeneral Ford Flex Discussions • Re: Mounting hardware for under-engine cover?
Hi, I'm new to this forum and to car repairs and maintenance in general. I have a 2019 Flex Ltd Ecoboost. Some of the fasteners for my under cover have broken. When I had my last oil change done from...
View ArticleTechnical / How-To Articles • Re: Can it really be this easy?
That's great! it was a good idea to replace all the bulbs while you had it open. I didn't think about that when I changed my bulbs.I believe this task should be reasonably easy by just removing the 3...
View ArticlePowertrain / Under The Hood • Re: SERVICE ADVANCETRAC message
And on my wife's way home tonight; she said every time she made a turn and tried to accelerate it made a sound like it was dragging metal. It was fine going in a straight line. Have an appointment...
View ArticlePowertrain / Under The Hood • Re: 2011 Flex Stability control causing safety...
Hi! Did you ever figure this issue out? I'm here because my 2011 Flex has also been overcorrecting about once a day for about a week now and it's super scary when the roads are clear and you suddenly...
View ArticleGeneral Ford Flex Discussions • Re: Preparing for the next major maintenance...
Adding the Whiteline rear sway bar to my list of next upgrades as well.
View ArticleSuspension, Wheels & Tires • Re: Other suspension upgrades available at...
After doing some research over on the SHO Forum it looks like my only other available upgrade would be the Whiteline rear sway bar.
View ArticleTechnical / How-To Articles • Re: Warning chime for no apparent reason
Hi, I have the same issue. Did you ever find out what the issue was. Batter?Thanks
View ArticleMembers Rides • Re: My 2011 build
Well today marks the end of the road for my trusty 2011 after 195K miles and 13 years. The motor that I put in last summer went. It's locked up. Past the warranty I had on it so decided enough was...
View ArticleInterior • Re: 3rd row seat removal & give away
Hey, thanks for the heads up on this. I removed the third seat a couple months ago. Haven't really noticed anything different but I will take a look at removing the seats from the bar(which is really...
View ArticleMembers Rides • Re: Project De-Chrome done!
Nice job! I'm about 80% done with mine. Spray paint for the front and fog surrounds and rear brushed aluminum panel. Vinyl wrap on the chrome beltline. Debadged everything else. Only door handles and...
View ArticleTechnical / How-To Articles • Re: SecuriCode Panel Replacment
Bringing an old topic back from the grave.I just had to replace my B-pillar panel too. It been taped on for over a year. I'd been using clear shipping tape, but on a recent trip, the clear stuff had...
View ArticleGeneral Ford Flex Discussions • Re: Mounting hardware for under-engine cover?
Just ordered 4 clips & 4 screws from Tasca. $73 with tax and shipping. I guess it hurts less than losing the shield on the road.
View ArticlePowertrain / Under The Hood • AWD w/ ft to rear shaft removed
Broke down hundreds of miles from home. I can't get under it, so it's at the local dealership... on a Friday afternoon. From what I'm hearing, I suspect one of the hanger bearings has went out. Back...
View ArticlePowertrain / Under The Hood • Re: Cowl Extension white plastic clip part number
I just cleaned my cowl drain. Here is a tip for removing those white clips. Use an 8mm socket on the bottom to compress them then pry them up with a screw driver. Also, you can clean your cowl drains...
View ArticleGeneral Ford Flex Discussions • Flex 2.0 build
Here is my 2014 SEL which replaces my 2011 SE which was retired after 195K miles and 13 years. The 2014 won't get as many mods since some of what I added to the 2011 is already on the 2014 (the pict...
View ArticlePerformance • Re: Engine upgrades - anything I'm missing?
Gearhead intercoolers came back in stock so I ordered one! Most likely I'm going to wait to order the XDI-35 and DW pumps until closer to spring until after I get all my tuning stuff sorted out and...
View ArticleGeneral Topics • Re: Member Names and Avatars
Time for avatar change as we just lost our sweet little shorkie 1 week after he turned 13.Died on New Year and we buried him Jan. 2. Forever in our hearts.I am sorry to hear of your loss Bing. But hey...
View Article